Read moreShow less
Carbon Monoxide Detector Visonic MCT-442
Carbon Monoxide Detector (CO), wireless, PowerCode MCT-422
STM-442 is a carbon monoxide detector (CO) wires without fully supervised.
In case of detection (CO), the MCT-442 transmits all alerts to the control panel, which immediately forwards the alert to a central monitoring or to a private telephone number. This enables a quick and effective response to prevent danger of poisoning by carbon monoxide.
High accuracy and reliability, uses a sophisticated electrochemical sensor that provides a linear output in proportion to the concentration of gas, which is more accurate technology available for CO sensing.
A sophisticated microprocessor receives data from a sensor, calculates the CO level and leakage term, and provides an alarm before dangerous levels of CO are present.
The detector has a life of five years and an expiration timer that notifies users when the detector should be replaced.
The importance of Carbon Monoxide (CO) Detector
Because CO is a colorless, odorless and tasteless gas, but very toxic and is produced in various situations, rapid identification of this gas is vital.
The MCT-442 offers the highest reliability, an attractive wireless detector, easy installation.
Fully supervised wireless detector transmits alarm alerts to the PowerMax control panel, which notifies the user or the monitoring center.
Gives early warning of risk of poisoning by carbon monoxide (CO), providing visual alarm indications, audible and transmitted when CO is detected
Audible information through the buzzer (95dB) and visible through a flashing LED.
Continuous self-test and manual tests
Five-year life, with the notification of end of life
Powered by battery, ensuring continuous protection.
Low battery information
Easy to install on wall or ceiling (with stand)
Easy battery replacement battery replacement
Transmission frequency: 868 MHz