Read moreShow less
Dinsafe™, MatiGard™, Magictrl™ are trademarks of Dinsafe Inc.
The MatiGard Air is a modern alarm system with an attractive design and rich in features.
With capacity to add up to 99 wireless detectors + IP Cameras.
The MatiGard Air is controlled through a powerful App, Magictrl for Android and iOS
The MatiGard Air Firmware can be updated directly via the PC, using the same USB cable from the power.
All accessories, including IP cameras are paired to the system via QR code scanning or bar code shown in the detectors and cameras.
All SMS transmitted through the App are sent encrypted
It works with IP cameras in the same App
Admin code and user code are different for different level of permissions
SIM card balance control, directly through the App for prepaid cards
Editing zone names, and editing the names of remote controls or keyboards to identify the person to arm or disarm the alarm
When alarming, sends warnings by SMS and phone call to 6 different numbers
In case of danger or threat can disarm the alarm through a duress code that disarms the system and silently forward immediately a request for SOS to the programmed numbers.
The Administrator number can receive information from the following events:
When and by whom, the alarm system is armed or disarmed by remote control, or the App,
Power failure information 230VAC,
Energy recovery information 230VAC,
Information about panel low battery,
Information about sensor low battery.
Alarm panel with GSM module
2 wireless magnetic sensors,
1 wireless motion detector,
2 remote controls with 4 keys
MatiGard Air - User manual