KF-234 PG2 is a miniature PowerG 4-button (6-function) keyfob, designed for use with PowerG control panels.
The MC-302 PG2 is a fully supervised, PowerG magnetic contact device. The MC-302 PG sends theparameters of the specific alarm to the control panel using PowerG 2-way communications protocol.
The MC-302E PG2 is a two-way wireless PowerG magnetic contact device.The device includes a built-in reed switch and an auxiliary hard-wired input, programmable as either N.O., N.C. or E.O.L., for use with additional sensors
The FLD-550 PG2 is a fully supervised two-way indoor, PowerG flood detector, used to detect the presence of water based fluids at any desired location.
KF-235 PG2 is a PowerG keyfob, for use with the PowerMaster panels.Commands are invoked by pressing any of the four command buttons. Status is indicated via the Status LEDs and buzzer after every command.
The SD-304 PG2 is a wireless PowerG innovative shock detector with optional magnetic contact and auxiliaryinput interfacing with PowerMaster-10 and PowerMaster-30 control panels
The Next PG2 and Next K9-85 PG2 are 2-way, microprocessor-controlled, wireless digital PIR detectors.
Next K9-85 PG2 and the NEXT PG2 are 2-way, microprocessor-controlled, wireless digital PIR detectors.
The Visonic CLIP PG2 is a small and elegant wireless curtain-pattern PIR detector for indoor use and designed for easy installation.
The TMD-560 PG2 is a wireless PowerG detector used with the PowerMaster alarmsystem. The detector is designed to update the alarm system control panel upon anychange of temperature.
The TOWER-30AM PG2 and TOWER-30AM K9-90 PG2 (pet-immune) are 2-way, microprocessorcontrolled,wireless digital mirror PIR detectors for use with all PowerMaster® control panels (version 13 and higher).
SMD-426 PG2 is a photoelectric smoke detector automatic with integral audible signal for open area protection.
SMD-426 PG2 (photoelectric smoke detector) and SMD-427 PG2 (heat and photoelectric smoke detector) are automatic fire detectors with integral audible signal for open area protection, designed to sense heat or smok.
The RP-610 PG2 is a range extender designed to relay digital databetween wireless PowerG control panel devices and a PowerGcontrol panel.
The SR-720 PG2 is a full 2-way wireless PowerG indoor siren,designed for installation in areas in which wiring action is difficultor impossible.
The GSD-442 PG2 is a Wireless PowerG Two-way Carbon Monoxide (CO) Detector designed to monitor the CO gas level in residential dwellings and give early warning before potentially dangerous levels exist
The GSD-441 PG2 is a wireless PowerG two-way natural gas(Methane) detector. The GSD-441 PG2 is a natural gas detectordesigned to send an alarm when Methane gas is detected.
The GB-501 PG2 is a wireless two-way glass-break detector that detects the breaking of framed glass mounted in an outside wall.
The SR-740 PG2 is a fully wireless outdoor siren, designed forinstallation in areas in which wiring action is difficult or impossible.The siren is compatible with PowerG control panels.
NEXT CAM K9-85 PG2PowerG, Wireless, Pet-tolerant, PIR Motion detector with Integrated Camera
The TOWER-20 PG2 is a 2-way, wireless outdoor digital mirror PIR detector which includes 8 independent quad PIR detectors (Octa-QUAD).