Fast Shipping
All orders are typically shipped within 24 hours.
Warranties
All our equipment comes with a 3-year warranty, excluding consumables.
Technical Support
Excellent customer support before and after the sale.
Quotes
Customized quotes are available at our facilities or by email.
Customer Service
Support is available by phone, WhatsApp, email, or in person at our stores.
DS-KIS702Y - Hikvision 2-Wire IP Video Intercom Kit with 7" Wi-Fi Monitor and 2MP Camera:
- Hikvision digital 2-wire IP video intercom kit for single-family homes and residential installations.
- Digital audio and video communication system with one call button.
- DS-KD8003Y-IME2/Surface outdoor door station included.
- DS-KH6320Y-WTE2 indoor monitor with Wi-Fi connectivity included.
- DS-KAD704Y audio and video distributor included.
- DS-KAW30-2N power supply included.
- 16GB TF memory card included.
- High-definition 2MP outdoor camera.
- Full HD main video resolution of 1920 × 1080 pixels.
- Configurable 720p resolution.
- Main video transmission at 1080p/30fps or 720p/30fps.
- D1 secondary video stream with 720 × 480 pixel resolution.
- H.264, H.265 and MJPEG video compression according to official online specifications.
- Night vision with supplementary infrared illumination.
- True WDR technology for improved images in high-contrast lighting conditions.
- Backlight compensation.
- Digital noise reduction.
- Motion detection support.
- 146° horizontal viewing angle.
- 82° vertical viewing angle.
- Full-duplex two-way audio communication.
- Built-in omnidirectional microphone and speaker on the outdoor station.
- Noise suppression and echo cancellation.
- G.711U audio compression on the outdoor station.
- Two lock-control relays rated up to 30V DC and 2A.
- Four alarm inputs on the outdoor station.
- Outdoor RS-485 interface for communication with Hikvision submodules.
- TAMPER switch for anti-tampering protection.
- 12V DC power output, up to 500mA, on the outdoor station.
- Outdoor station with IP65 protection rating.
- Surface-mounted outdoor door station.
- Outdoor operating temperature from -40°C to +60°C.
- Indoor monitor with a 7-inch TFT LCD capacitive touchscreen.
- Monitor resolution of 1024 × 600 pixels.
- Wi-Fi 802.11b/g/n connectivity on the indoor monitor.
- TCP/IP, SIP and RTSP protocols supported by the monitor.
- Indoor monitor with built-in microphone and speaker.
- Monitor with 8 alarm input zones.
- Monitor with 2 relay outputs and an RS-485 interface.
- TF memory card support up to 128GB on the monitor.
- DS-KAD704Y distributor with 6 two-wire interfaces and one RJ45 port.
- DS-KAW30-2N power supply providing 24V DC output.
- Device power supplied through the two-wire distributor.
- Indoor monitor power consumption of up to 4W.
- Indoor monitor operating temperature from -10°C to +50°C.
- Digital two-wire video intercom solution for residential installations.
DS-KIS702Y - Hikvision 2-Wire Video Intercom Kit with 7-Inch Wi-Fi Monitor
The DS-KIS702Y is a digital Hikvision video intercom system designed for single-family homes and residential installations. This 2-wire video intercom kit provides audio and video communication between the entrance and the interior of the property through an outdoor door station with a 2MP camera and a 7-inch touchscreen monitor with Wi-Fi connectivity.
The kit includes the DS-KD8003Y-IME2/Surface outdoor door station, DS-KH6320Y-WTE2 indoor monitor, DS-KAD704Y distributor, DS-KAW30-2N power supply and a 16GB TF memory card. This configuration brings together the main components specified by Hikvision for a digital two-wire video intercom installation.
The DS-KIS702Y video intercom combines Full HD video, True WDR technology, infrared night vision, full-duplex two-way audio communication and access control. Its 7-inch Wi-Fi monitor provides a touchscreen interface for communicating with visitors, while the distributor connects the compatible system devices.
This Hikvision video intercom is suitable for installations requiring a 2-wire video intercom kit with a 2MP camera, 7-inch Wi-Fi monitor, DS-KAD704Y distributor and DS-KAW30-2N power supply. The outdoor door station also features an IP65 protection rating for the installation conditions specified by the manufacturer.
DS-KIS702Y - Hikvision Digital 2-Wire Video Intercom
The DS-KIS702Y uses a digital IP two-wire architecture to connect the system components through a compatible distributor.
This video intercom enables communication with visitors from the indoor monitor and provides the access control functions supported by the equipment.
Two-wire technology differs from a conventional Ethernet PoE installation because the devices receive their power through the system distributor.
DS-KIS702Y Video Intercom Kit Contents
The DS-KIS702Y video intercom kit includes a DS-KD8003Y-IME2/Surface outdoor door station equipped with a 2MP camera and one call button.
It also includes a DS-KH6320Y-WTE2 indoor monitor with a 7-inch touchscreen and Wi-Fi connectivity, together with the DS-KAD704Y distributor.
The DS-KAW30-2N power supply and a 16GB TF memory card complete the official kit contents.
2MP Camera of the Hikvision DS-KIS702Y Video Intercom
The outdoor door station of the Hikvision DS-KIS702Y video intercom features a 2MP high-definition camera designed to capture images of visitors at the entrance.
The main video resolution reaches 1920 × 1080 pixels, with a configurable 720p resolution option.
The camera enables users to view the person at the entrance and communicate through the indoor monitor.
Full HD Video and Digital Compression
The system supports main video transmission at 1080p at 30fps and 720p at 30fps.
The secondary video stream uses a D1 resolution of 720 × 480 pixels.
Official online specifications indicate support for H.264, H.265 and MJPEG. Availability of individual formats may depend on the firmware version.
Night Vision of the 2-Wire Video Intercom
The outdoor camera of the two-wire video intercom supports low-light operation and features supplementary infrared illumination.
This function allows the entrance to be viewed when ambient lighting is reduced.
The exact infrared illumination range is not specified in metres in the kit's technical datasheet.
True WDR Technology and Backlight Compensation
True WDR technology helps improve the representation of bright and dark areas within the same image.
Backlight compensation helps users view visitors when a strong light source is positioned behind them.
These functions are particularly useful for outdoor entrances exposed to changing lighting conditions throughout the day.
Digital Noise Reduction and Motion Detection
The outdoor door station supports digital noise reduction, helping to minimise visual interference in captured images.
The system also supports motion detection.
The use of these functions depends on the available equipment settings and system configuration.
146° Horizontal and 82° Vertical Viewing Angles
The camera provides a 146° horizontal viewing angle and an 82° vertical viewing angle.
This wide field of view allows users to observe an extended area in front of the entrance.
The outdoor door station should be positioned according to the installation height and the area that needs to be monitored.
Full-Duplex Two-Way Audio Communication
The DS-KIS702Y supports full-duplex two-way audio communication between the outdoor door station and the indoor monitor.
The outdoor station incorporates an omnidirectional microphone and a speaker, together with noise suppression and echo cancellation.
Outdoor audio compression uses the G.711U format at 64Kbps for voice transmission within the system.
DS-KIS702Y 7-Inch Wi-Fi Monitor
The DS-KH6320Y-WTE2 indoor monitor features a 7-inch TFT LCD capacitive touchscreen.
Its 1024 × 600 pixel resolution enables users to view images transmitted by the outdoor door station.
The monitor uses an embedded Linux operating system and includes 128MB of memory and 32MB of Flash memory.
Wi-Fi Connectivity and Network Protocols
The Hikvision video intercom monitor supports Wi-Fi 802.11b/g/n connectivity.
The device supports TCP/IP, SIP and RTSP network protocols.
Physical communication between the main kit components uses the digital two-wire system. The technical datasheet does not confirm built-in Wi-Fi connectivity on the outdoor door station.
Access Control with Two Relays
The DS-KIS702Y outdoor door station includes two lock-control relays, with a stated maximum electrical rating of 30V DC and 2A.
These relays allow compatible electric locking mechanisms to be connected according to the system's electrical requirements.
A 12V DC power output of up to 500mA is also available on the outdoor station. Its use must comply with the specifications of the connected device.
Alarm Inputs and RS-485 Interface
The outdoor door station includes four alarm inputs, configured by default for two exit buttons and two door contacts.
An RS-485 interface enables communication with compatible Hikvision submodules.
The indoor monitor provides eight alarm input zones, two relay outputs and an RS-485 interface.
TAMPER Anti-Tampering Protection
The outdoor video intercom station includes a TAMPER switch designed to detect certain unauthorised tampering conditions.
This function complements the security features of the access control system.
Correct operation depends on proper equipment installation and the applicable configuration settings.
IP65 Protection for the Outdoor Door Station
The outdoor door station features an IP65 protection rating, indicating protection against dust and water jets.
It supports operating temperatures ranging from -40°C to +60°C.
The outdoor unit included in the kit is identified as a surface-mounted model.
DS-KAD704Y Distributor for the Video Intercom Kit
The DS-KAD704Y distributor interconnects compatible devices within the digital two-wire system.
It provides six two-wire interfaces, including two for cascading connections and four for devices.
It also includes an RJ45 network port, six signal indicators, one power indicator and one reset button.
DS-KAW30-2N Power Supply Included with the DS-KIS702Y
The DS-KIS702Y video intercom kit includes the DS-KAW30-2N power supply, as identified in the official Hikvision kit configuration.
This power supply provides a 24V DC output corresponding to the voltage required by the DS-KAD704Y distributor.
The inclusion of the DS-KAW30-2N power supply ensures that the kit contains the specified power supply component for this configuration.
Power Supply for the Digital 2-Wire Video Intercom
The outdoor door station and indoor monitor receive power through a compatible KAD704Y or KAD706Y series distributor.
The supplied distributor is the DS-KAD704Y, which requires a 24V DC power supply.
This architecture differs from a conventional Ethernet PoE installation and must comply with the manufacturer's wiring and power requirements.
16GB TF Card Included and Support for up to 128GB
The DS-KIS702Y includes a 16GB TF memory card.
The indoor monitor supports TF memory cards with a maximum capacity of 128GB.
Available storage functions depend on the device specifications and system configuration options.
Dimensions and Operating Conditions
The outdoor door station measures 100 × 98 × 42mm.
The indoor monitor measures 200 × 140 × 23.6mm and is designed for wall installation.
The monitor operates between -10°C and +50°C, while the DS-KAD704Y distributor supports temperatures from -10°C to +55°C.
DS-KIS702Y - Hikvision Video Intercom for Residential Properties
The DS-KIS702Y combines a 2MP outdoor camera, a 7-inch Wi-Fi monitor and the components of a digital two-wire system.
This Hikvision video intercom provides Full HD video, two-way audio communication, infrared night vision, True WDR technology and access control.
With the DS-KAD704Y distributor, DS-KAW30-2N power supply and 16GB TF memory card included, this 2-wire video intercom kit offers an audio and video communication and access control solution for residential installations.
| Parameter | Detailed Technical Specifications |
|---|---|
| Reference | DS-KIS702Y |
| Brand | Hikvision |
| Product type | Digital 2-wire IP video intercom kit |
| Application | Single-family homes and residential installations |
| Technology | Digital 2-wire IP system |
| Call buttons | 1 |
| Included outdoor door station | 1 × DS-KD8003Y-IME2/Surface |
| Included indoor monitor | 1 × DS-KH6320Y-WTE2 |
| Included distributor | 1 × DS-KAD704Y |
| Included power supply | 1 × DS-KAW30-2N |
| Included memory card | 1 × 16GB TF card |
| Outdoor station processor | Embedded microcontroller |
| Outdoor station operating system | Embedded Linux |
| Outdoor operation mode | Single button |
| Outdoor station camera | 2MP |
| Main stream resolution | 1920 × 1080 pixels; configurable 720p |
| Sub-stream resolution | 720 × 480 pixels |
| Main stream frame rate | 1080p at 30fps; 720p at 30fps |
| Sub-stream | D1 |
| Video compression | H.264, H.265, MJPEG (official online specifications) |
| Night vision | Low-light operation and IR illumination support |
| Backlight compensation | Supported |
| Digital noise reduction | Supported |
| WDR | True WDR |
| Motion detection | Supported |
| Horizontal viewing angle | 146° |
| Vertical viewing angle | 82° |
| Anti-flicker frequency | 50Hz / 60Hz |
| Outdoor microphone | Built-in omnidirectional microphone |
| Outdoor speaker | Built-in; sound level above 80dB at 20cm |
| Outdoor audio quality | Noise suppression and echo cancellation |
| Outdoor audio compression | G.711U |
| Outdoor audio bitrate | 64Kbps |
| Audio communication | Full-duplex two-way audio |
| Secondary door station capacity | 16 |
| Outdoor station network protocols | TCP/IP, RTSP, IPv6, ONVIF (official online specifications) |
| Outdoor debugging port | 1 |
| Outdoor RS-485 interface | 1, for Hikvision submodules |
| Outdoor alarm inputs | 4 |
| Default outdoor input configuration | 2 exit buttons and 2 door contacts |
| Lock control | 2 relays |
| Outdoor relay electrical rating | Maximum 30V DC, 2A |
| Anti-tampering protection | 1 TAMPER switch |
| Outdoor power output | 12V DC, maximum 500mA |
| Outdoor station power supply | Through compatible KAD704Y or KAD706Y distributor |
| Outdoor operating temperature | -40°C to +60°C |
| Outdoor operating humidity | 10% to 90% |
| Outdoor station protection rating | IP65 |
| Outdoor station installation | Surface mounting |
| Outdoor station width | 100mm |
| Outdoor station height | 98mm |
| Outdoor station depth | 42mm |
| Outdoor station dimensions | 100 × 98 × 42mm |
| Monitor operating system | Embedded Linux |
| Monitor memory | 128MB |
| Monitor Flash memory | 32MB |
| Monitor display type | Colour TFT LCD |
| Screen size | 7 inches |
| Screen resolution | 1024 × 600 pixels |
| Operation method | Capacitive touchscreen |
| Monitor microphone | Built-in omnidirectional microphone |
| Monitor speaker | Built-in |
| Monitor audio quality | Noise suppression and echo cancellation |
| Volume adjustment | Local or software-based |
| Monitor audio compression | G.711U, G.711A |
| Monitor audio bitrate | 64Kbps |
| Monitor wired network | Digital 2-wire network |
| Monitor wireless network | Wi-Fi 802.11b/g/n |
| Monitor network protocols | TCP/IP, SIP, RTSP |
| Monitor network interface | 2-wire interface |
| Monitor RS-485 interface | 1 |
| Monitor alarm inputs | 8 zones |
| Monitor relay outputs | 2 |
| TF card support | Yes, up to 128GB |
| Monitor power supply | Through compatible KAD704Y or KAD706Y distributor |
| Monitor power consumption | ≤ 4W |
| Monitor operating temperature | -10°C to +50°C |
| Monitor operating humidity | 10% to 90% |
| Monitor width | 200mm |
| Monitor height | 140mm |
| Monitor depth | 23.6mm |
| Monitor dimensions | 200 × 140 × 23.6mm |
| Audio and video distributor | DS-KAD704Y |
| Distributor network interface | 1 × RJ45 |
| Distributor two-wire interfaces | 6, including 2 cascading connections and 4 device connections |
| Distributor signal indicators | 6 |
| Distributor power indicator | 1 |
| Distributor reset button | 1 |
| Distributor power supply | 24V DC |
| Distributor consumption, CH1-CH3 | Less than 4W |
| Distributor consumption, CH4 | Less than 8W |
| Distributor operating temperature | -10°C to +55°C |
| Distributor operating humidity | 10% to 90% |
| Supplied power supply | DS-KAW30-2N |
| Power supply output voltage | 24V DC |
| Power supply output power | 36W, according to the DS-KAW30-2N specifications |
| Power supply operating temperature | -30°C to +70°C |
| Power supply operating humidity | 20% to 90%, non-condensing |
| Power supply dimensions | 35 × 90 × 54.5mm |