Sold out
visonic
Reference: P-MAX-PRO-GSM
Visonic PowerMax Pro 86 kit with GSM module
MC-302 PG2 PowerG, Wireless, Door/Window Contact
The MC-302 PG2 is a fully supervised, PowerG magnetic contact device.
The MC-302 PG sends the
parameters of the specific alarm to the control panel using PowerG 2-way communications protocol.
€44.90
(tax incl.)
Reference:
MC-302 PG2
Brand:
Add to compare0
Add to wishlist
The MC-302 PG2 is a fully supervised, PowerG magnetic contact device. The device includes a builtin
reed switch (that opens upon removal of a magnet placed near it). The MC-302 PG sends the
parameters of the specific alarm to the control panel using PowerG 2-way communications protocol.
The MC-302 PG 2 tamper switch is activated when the cover is removed.
A periodic supervision message is transmitted automatically. The control panel is thus informed, at
regular intervals, of the unit’s active participation in the system.
An LED lights whenever alarm or tamper events are reported. The LED does not light while a
supervision message is being transmitted.
Operating power is obtained from an on-board 3 V Lithium battery. When the battery voltage is low, a
“low battery” message is sent to the receiver.
You may also like
visonic
Reference: KF-235 PG2
€52.20
(tax incl.)
KF-235 PG2 is a PowerG keyfob, for use with the PowerMaster panels.
Commands are invoked by pressing any of the four command buttons. Status is indicated via the Status LEDs and buzzer after every command.
Out-of-StockSold out
visonic
Reference: KF-234 PG2
€38.50
(tax incl.)
KF-234 PG2 is a miniature PowerG 4-button (6-function) keyfob, designed for use with PowerG control panels.
Out-of-StockSold out
visonic
Reference: SR-740 PG2
€143.00
(tax incl.)
The SR-740 PG2 is a fully wireless outdoor siren, designed for
installation in areas in which wiring action is difficult or impossible.
The siren is compatible with PowerG control panels.
Out-of-StockSold out
visonic
Reference: SR-720 PG2
€112.50
(tax incl.)
The SR-720 PG2 is a full 2-way wireless PowerG indoor siren,
designed for installation in areas in which wiring action is difficult
or impossible.
visonic
Reference: RP-600 PG2
€110.90
(tax incl.)
The RP-600 PG2 is a range extender designed to relay digital data
between wireless PowerG control panel devices and a PowerG
control panel.
visonic
Reference: GSD-441 PG2
€133.50
(tax incl.)
The GSD-441 PG2 is a wireless PowerG two-way natural gas
(Methane) detector. The GSD-441 PG2 is a natural gas detector
designed to send an alarm when Methane gas is detected.
visonic
Reference: SMD-427 PG2
€95.20
(tax incl.)
SMD-426 PG2 (photoelectric smoke detector) and SMD-427 PG2 (heat and photoelectric smoke detector) are automatic fire detectors with integral audible signal for open area protection, designed to sense heat or smok.
